สวิตช์เกียร์แบบถอดได้แรงดันต่ํา GCS

ภาพรวมผลิตภัณฑ์

สวิตช์เกียร์แบบถอดได้แรงดันต่ํา GCS

A low-voltage withdrawable switchgear for power conversion, distribution and motor control center applications.

ออกแบบมาสําหรับระบบจําหน่ายไฟฟ้าที่ต้องการการทํางานที่มั่นคงการป้องกันวงจรที่ชัดเจนและการติดตั้งในทางปฏิบัติสําหรับโครงการอุตสาหกรรมเชิงพาณิชย์สาธารณูปโภคและโครงสร้างพื้นฐาน.

บริษัท ตงฟาง อิเล็คทริค พาวเวอร์ (ซานตง) จํากัด สนับสนุนการเลือกผลิตภัณฑ์ตามระดับแรงดันไฟฟ้า, กระแสไฟพิกัด, สภาพแวดล้อมการติดตั้ง, โครงสร้างตู้, วิธีการเชื่อมต่อสายเคเบิล, และความต้องการเอกสารโครงการ.

สวิตช์เกียร์แบบถอดได้แรงดันต่ํา GCS

Product Application

The GCS low-voltage withdrawable switchgear is suitable for low-voltage distribution systems in power plants, substations, petrochemical departments, factories and mining enterprises, and high-rise buildings. It is used as a power center, distribution center and motor control center for power conversion, distribution and control, including electric capacitor compensation.

For low-voltage power control centers and motor control centers in large single-unit power plants and large petrochemical industries, it can meet special computer-interface requirements. The product was developed to meet the requirements of power authorities, broad power users and design institutes, and to satisfy market needs such as increased capacity, computer interface, centralized power control, convenient installation and shortened accident treatment time. It follows safety, economy, rationality and reliability principles, with high breaking and making capacity, good dynamic and thermal stability, flexible electrical schemes, convenient combination, novel structure and high protection grade. It can be used as a replacement product for low-voltage withdrawable switchgear and complies with IEC439-1, GB7251 and ZBK36001 standards.

Model Meaning

GEnclosed switchgear
CWithdrawable type
SSen-Yuan electrical system
Main / Auxiliary SchemeMain circuit scheme number and auxiliary circuit scheme number

Use Environment Conditions

  1. The ambient air temperature shall not be higher than +40C, not lower than -5C, and the 24-hour average temperature shall not be higher than +35C. If exceeded, derating shall be considered according to actual conditions.
  2. For indoor use, the altitude of the installation site shall not exceed 2000m.
  3. The relative humidity of the surrounding air shall not exceed 50% at the maximum temperature of +40C. Higher relative humidity is allowed at lower temperatures, for example 90% at +20C. The possible influence of occasional condensation caused by temperature changes shall be considered.
  4. When installed, the inclination from the vertical plane shall not exceed 5 degrees, and the cabinet group shall be relatively aligned and flat.
  5. The product is suitable for transportation and storage from -25C to +55C, and may reach +70C for a short time not exceeding 24 hours.
  6. The device shall be installed in places without severe vibration or impact, and where electrical components will not be corroded.

Main Technical Parameters

Main Circuit Rated VoltageAC 380V (400V), 660V
Auxiliary Circuit Rated VoltageAC 220V, 380V (400V); DC 110V, 220V
Rated Frequency50Hz (60Hz)
Rated Insulation Voltage600V (1000V)
Rated CurrentHorizontal busbar: 4000A; vertical busbar (MCC): 1000A
Busbar Rated Short-Time Withstand Current50kA or 80kA / 1s
Busbar Rated Peak Withstand Current105kA or 176kA / 0.1s
Power-Frequency Test VoltageMain circuit 2500V/min; auxiliary circuit 1760V/min
Busbar SystemThree-phase four-wire or three-phase five-wire: A, B, C, PEN
Protection GradeIP30, IP40
ผลิตภัณฑ์ที่เกี่ยวข้อง

ต้องการการสนับสนุนสําหรับโครงการจําหน่ายไฟฟ้าของคุณหรือไม่?

ส่งระดับแรงดันไฟฟ้าความสามารถในการโหลดสภาพแวดล้อมการติดตั้งและความต้องการของผลิตภัณฑ์ เราจะช่วยตรวจสอบทิศทางการกําหนดค่าที่เหมาะสม.
ข้อดี

ข้อดีของผลิตภัณฑ์

ประสิทธิภาพทางไฟฟ้าที่มั่นคง

ผลิตภัณฑ์ได้รับการคัดเลือกเพื่อการจําหน่าย การป้องกัน การสลับ และการควบคุมที่เชื่อถือได้ในระบบไฟฟ้าที่ใช้งานได้จริง.

การกําหนดค่าเชิงโครงการ

อุปกรณ์สามารถจับคู่กับระดับแรงดันไฟฟ้าความจุโครงสร้างตู้รายการสายเคเบิลและสภาพแวดล้อมการติดตั้ง.

การสนับสนุนการผลิตและเอกสาร

เอกสารทางเทคนิค ภาพวาด ฉลาก การบรรจุ และข้อกําหนดในการจัดส่งสามารถประสานงานสําหรับการใช้งานโครงการได้.

Dongfang Solutions Entry image
การผลิตและการสนับสนุนโครงการ

สร้างขึ้นสําหรับโครงการจําหน่ายไฟฟ้า

บริษัท ตงฟาง อิเล็คทริค พาวเวอร์ (ซานตง) จํากัด มุ่งเน้นอุปกรณ์จําหน่ายไฟฟ้าเชิงโครงการ ได้แก่ กล่องกระจายสินค้า ตู้กระจายสินค้า สวิตช์เกียร์แบบถอดได้ ชุดหลักวงแหวน กล่องสาขาเคเบิล ตู้ชดเชย ระบบสูบจ่าย ระบบบัสเวย์ และสายไฟ.

การตรวจสอบการกําหนดค่า

ตรวจสอบรุ่นผลิตภัณฑ์ตามแรงดันไฟฟ้าความจุปริมาณป้อนและสภาพแวดล้อมการติดตั้ง.

การสนับสนุนเอกสาร

ประสานงานภาพวาดพารามิเตอร์ทางเทคนิคฉลากรายละเอียดการบรรจุและเอกสารการส่งมอบ.

สอบถามผลิตภัณฑ์

ต้องการการกําหนดค่าหรือใบเสนอราคาหรือไม่?

บอกชื่อผลิตภัณฑ์ระดับแรงดันไฟฟ้าความสามารถในการรับน้ําหนักปริมาณสถานที่ติดตั้งและข้อกําหนดในการจัดส่ง ทีมงานของเราจะช่วยตรวจสอบการกําหนดค่าผลิตภัณฑ์ที่เหมาะสม.

สอบถามเว็บไซต์
ฝากรายละเอียดและข้อกําหนดของคุณไว้และให้เราติดต่อคุณ.
สอบถามเว็บไซต์