GGD Series AC Gabinete de distribuição de energia de baixa tensão

Visão geral do produto

GGD Series AC Gabinete de distribuição de energia de baixa tensão

A fixed AC low voltage power distribution cabinet for power conversion, distribution and control in AC 380V systems.

Projetado para sistemas de distribuição elétrica que exigem operação estável, proteção de circuito livre e instalação prática para projetos industriais, comerciais, de serviços públicos e de infraestrutura.

Dongfang Electric Power (Shandong) Co Ltd. suporta a seleção de produtos por nível de tensão, corrente nominal, ambiente de instalação, estrutura do gabinete, método de conexão de cabos e necessidades de documentação do projeto.

GGD Type AC Low Voltage Power Distribution Cabinet

Aplicação Produto

The GGD type AC low voltage power distribution cabinet is suitable for power users such as power plants, substations, factories and mining enterprises. It is used in AC 50Hz distribution systems with rated operating voltage of 380V and rated operating current up to 3150A for power conversion, distribution and control of power, lighting and distribution equipment.

The GGD cabinet was designed according to requirements from the competent energy authority, broad power users and design departments, based on principles of safety, economy, rationality and reliability. It has high breaking capacity, good dynamic and thermal stability, flexible electrical schemes, convenient combination, strong serialization and practicality, novel structure and high protection grade. It is an updated product for low-voltage complete switchgear. It complies with IEC439 Low-Voltage Switchgear and Controlgear and GB7251 Low-Voltage Complete Switchgear standards.

Use as Condições Ambientais

  1. The ambient air temperature shall not be higher than +40C, not lower than -5C, and the 24-hour average temperature shall not be higher than +35C.
  2. For indoor installation and use, the altitude of the installation site shall not exceed 2000m.
  3. The relative humidity of the surrounding air shall not exceed 50% at the maximum temperature of +40C. Higher relative humidity is allowed at lower temperatures, for example 90% at +20C. The possible influence of occasional condensation caused by humidity changes shall be considered.
  4. When installed, the inclination from the vertical plane shall not exceed 5 degrees.
  5. The device shall be installed in places without severe vibration or impact, and where electrical components will not be corroded.
  6. If the user has special requirements, they can be negotiated with the company.

Significado Modelo

GAC low-voltage distribution cabinet
GFixed installation and fixed wiring of electrical components
DPower cabinet
Design Sequence1: breaking capacity 15kA; 2: breaking capacity 30kA; 3: breaking capacity 50kA
Main / Auxiliary Circuit SchemeMain circuit scheme code and auxiliary circuit scheme code

Electrical Performance – Technical Parameters

ModelTensão nominalCorrente avaliadoRated Short-Circuit Breaking CurrentAvaliado em curto prazo para resistir à correntePico avaliado suporta corrente
GGD1 A380V1000A15kA15kA30kA
GGD1 B380V600A (360A)15kA15kA30kA
GGD1 C380V400A15kA15kA30kA
GGD2 A380V1500A (1600A)30kA30kA63kA
GGD2 B380V1000A30kA30kA63kA
GGD3 A380V3150A50kA50kA105kA
GGD3 B380V2500A50kA50kA105kA
GGD3 C380V2000A50kA50kA105kA

Esquema do Circuito Principal

The main circuit of the GGD cabinet is designed with 129 schemes and 298 specifications, excluding derivative schemes and specifications caused by auxiliary circuit function changes and control voltage changes. GGD1 has 49 schemes and 123 specifications; GGD2 has 50 schemes and 107 specifications; GGD3 has 27 schemes and 68 specifications. The main circuit schemes were selected after consulting design and user departments and include schemes required by power plants. Rated current is increased to 3150A, suitable for distribution transformers of 2000kVA and below. In addition, GGJ1 and GGJ2 capacitor compensation cabinets are designed for reactive power compensation, with 4 main circuit schemes and 12 specifications.

Produtos Relacionados

Precisa de suporte para seu projeto de distribuição de energia?

Envie seu nível de tensão, capacidade de carga, ambiente de instalação e requisitos do produto Ajudaremos a revisar uma direção de configuração adequada.
Vantagens

Vantagens do produto

Desempenho Elétrico Estável

Os produtos são selecionados para distribuição, proteção, comutação e controle confiáveis em sistemas de energia práticos.

Configuração Orientada a Projetos

O equipamento pode ser combinado ao nível de tensão, capacidade, estrutura do armário, entrada do cabo, e ambiente da instalação.

Suporte de fabricação e documentação

Documentos técnicos, desenhos, etiquetas, requisitos de embalagem e entrega podem ser coordenados para uso no projeto.

Dongfang Solutions Entry image
Fabricação e suporte a projetos

Construído para Projetos de Distribuição Elétrica

Dongfang Electric Power (Shandong) Co Ltd. concentra-se em equipamentos de distribuição de energia orientados para projetos, incluindo caixas de distribuição, armários de distribuição, quadros de distribuição retiráveis, unidades principais de anel, caixas de ramais de cabos, gabinetes de compensação, sistemas de medição, sistemas de vias de ônibus e cabos de energia.

Configuração Revisão

Revise modelos de produtos com base na tensão, capacidade, quantidade do alimentador e ambiente de instalação.

Suporte a documentos

Coordenar desenhos, parâmetros técnicos, etiquetas, detalhes de embalagem e documentos de entrega.

Produto Inquérito

Precisa de uma configuração ou cotação?

Diga-nos o nome do produto, o nível de tensão, a capacidade de carga, a quantidade, o local de instalação e os requisitos de entrega Nossa equipe ajudará a verificar a configuração adequada do produto.

Inquérito Site
Deixe seus dados e requisitos e deixe-nos contatá-lo.
Inquérito Site