Gabinete de distribución de energía de bajo voltaje CA serie GGD

Descripción general del producto

Gabinete de distribución de energía de bajo voltaje CA serie GGD

A fixed AC low voltage power distribution cabinet for power conversion, distribution and control in AC 380V systems.

Diseñado para sistemas de distribución eléctrica que requieren operación estable, protección de circuito claro e instalación práctica para proyectos industriales, comerciales, de servicios públicos y de infraestructura.

Dongfang Electric Power (Shandong) Co., Ltd. admite la selección de productos por nivel de voltaje, corriente nominal, entorno de instalación, estructura del gabinete, método de conexión de cables y necesidades de documentación del proyecto.

GGD Type AC Low Voltage Power Distribution Cabinet

Aplicación del producto

The GGD type AC low voltage power distribution cabinet is suitable for power users such as power plants, substations, factories and mining enterprises. It is used in AC 50Hz distribution systems with rated operating voltage of 380V and rated operating current up to 3150A for power conversion, distribution and control of power, lighting and distribution equipment.

The GGD cabinet was designed according to requirements from the competent energy authority, broad power users and design departments, based on principles of safety, economy, rationality and reliability. It has high breaking capacity, good dynamic and thermal stability, flexible electrical schemes, convenient combination, strong serialization and practicality, novel structure and high protection grade. It is an updated product for low-voltage complete switchgear. It complies with IEC439 Low-Voltage Switchgear and Controlgear and GB7251 Low-Voltage Complete Switchgear standards.

Utilice las condiciones ambientales

  1. The ambient air temperature shall not be higher than +40C, not lower than -5C, and the 24-hour average temperature shall not be higher than +35C.
  2. For indoor installation and use, the altitude of the installation site shall not exceed 2000m.
  3. The relative humidity of the surrounding air shall not exceed 50% at the maximum temperature of +40C. Higher relative humidity is allowed at lower temperatures, for example 90% at +20C. The possible influence of occasional condensation caused by humidity changes shall be considered.
  4. When installed, the inclination from the vertical plane shall not exceed 5 degrees.
  5. El dispositivo se instalará en lugares sin vibraciones ni impactos severos y donde los componentes eléctricos no se corroan.
  6. If the user has special requirements, they can be negotiated with the company.

Significado del modelo

GAC low-voltage distribution cabinet
GFixed installation and fixed wiring of electrical components
DPower cabinet
Design Sequence1: breaking capacity 15kA; 2: breaking capacity 30kA; 3: breaking capacity 50kA
Main / Auxiliary Circuit SchemeMain circuit scheme code and auxiliary circuit scheme code

Electrical Performance – Technical Parameters

ModelTensión nominalActual nominalRated Short-Circuit Breaking CurrentCalificación de corriente de espera de corto plazoCorriente de resistencia máxima nominal
GGD1 A380V1000A15kA15kA30kA
GGD1 B380V600A (360A)15kA15kA30kA
GGD1 C380V400A15kA15kA30kA
GGD2 A380V1500A (1600A)30kA30kA63kA
GGD2 B380V1000A30kA30kA63kA
GGD3 A380V3150A50kA50kA105kA
GGD3 B380V2500A50kA50kA105kA
GGD3 C380V2000A50kA50kA105kA

Esquema del circuito principal

The main circuit of the GGD cabinet is designed with 129 schemes and 298 specifications, excluding derivative schemes and specifications caused by auxiliary circuit function changes and control voltage changes. GGD1 has 49 schemes and 123 specifications; GGD2 has 50 schemes and 107 specifications; GGD3 has 27 schemes and 68 specifications. The main circuit schemes were selected after consulting design and user departments and include schemes required by power plants. Rated current is increased to 3150A, suitable for distribution transformers of 2000kVA and below. In addition, GGJ1 and GGJ2 capacitor compensation cabinets are designed for reactive power compensation, with 4 main circuit schemes and 12 specifications.

Productos relacionados

¿necesita soporte para su proyecto de distribución de energía?

Envíe su nivel de voltaje, capacidad de carga, entorno de instalación y requisitos del producto. Le ayudaremos a revisar una dirección de configuración adecuada.
Ventajas

Ventajas del producto

Rendimiento eléctrico estable

Los productos se seleccionan para una distribución, protección, conmutación y control confiables en sistemas de energía prácticos.

Configuración orientada a proyectos

El equipo se puede adaptar al nivel de voltaje, la capacidad, la estructura del gabinete, la entrada del cable y el entorno de instalación.

Soporte de fabricación y documentación

Los documentos técnicos, dibujos, etiquetas, requisitos de embalaje y entrega se pueden coordinar para el uso del proyecto.

Dongfang Solutions Entry image
Fabricación y soporte de proyectos

Construido para Proyectos de Distribución Eléctrica

Dongfang Electric Power (Shandong) Co., Ltd. se centra en equipos de distribución de energía orientados a proyectos, incluidas cajas de distribución, gabinetes de distribución, aparamenta extraíble, unidades principales de anillo, cajas de derivación de cable, gabinetes de compensación, sistemas de medición, sistemas de vías de autobús y cables de alimentación.

Revisión de configuración

Revise los modelos de productos según el voltaje, la capacidad, la cantidad del alimentador y el entorno de instalación.

Soporte de documentos

Coordinar dibujos, parámetros técnicos, etiquetas, detalles de embalaje y documentos de entrega.

Consulta de producto

¿necesita una configuración o cotización?

Díganos el nombre del producto, el nivel de voltaje, la capacidad de carga, la cantidad, el sitio de instalación y los requisitos de entrega. Nuestro equipo le ayudará a comprobar la configuración adecuada del producto.

Consulta del sitio web
Deje sus datos y requisitos y permítanos contactarlo.
Consulta del sitio web